TY - GEN
T1 - A single-stage three-phase inverter based on cuk converters for PV applications
AU - Darwish, Ahmed
AU - Holliday, Derrick
AU - Ahmed, Shehab
AU - Massoud, Ahmed M.
AU - Williams, Barry W.
N1 - Generated from Scopus record by KAUST IRTS on 2019-11-27
PY - 2014/1/1
Y1 - 2014/1/1
N2 - This paper presents a new three-phase inverter based on the Cuk converter. The main feature of the proposed topology is that the energy storage elements, such as inductors and capacitors, can be reduced in order to improve the reliability, and reduce size and total cost. The buck-boost inherent characteristic of the Cuk converter, depending on the time-varying duty ratio, provides flexibility for standalone and grid connected applications when the required output ac voltage is lower or greater than the dc side voltage. This property is not found in the conventional current source inverter when the dc input current is always greater than the ac output or in the conventional voltage source inverter as the output ac voltage is always lower than the dc input. The proposed system allows much smaller, more reliable nonelectrolytic capacitors to be used for energy source filtering. The new three-phase inverter is convenient for photovoltaic applications where continuous input currents are required for maximum power point tracking operation. Average large and small signal models are used to study the Cuk converter's nonlinear operation. The basic structure, control design, and MATLAB/SIMULINK results are presented. Practical results substantiate the design flexibility of the Cuk-based topology controlled by a TMSF280335 DSP.
AB - This paper presents a new three-phase inverter based on the Cuk converter. The main feature of the proposed topology is that the energy storage elements, such as inductors and capacitors, can be reduced in order to improve the reliability, and reduce size and total cost. The buck-boost inherent characteristic of the Cuk converter, depending on the time-varying duty ratio, provides flexibility for standalone and grid connected applications when the required output ac voltage is lower or greater than the dc side voltage. This property is not found in the conventional current source inverter when the dc input current is always greater than the ac output or in the conventional voltage source inverter as the output ac voltage is always lower than the dc input. The proposed system allows much smaller, more reliable nonelectrolytic capacitors to be used for energy source filtering. The new three-phase inverter is convenient for photovoltaic applications where continuous input currents are required for maximum power point tracking operation. Average large and small signal models are used to study the Cuk converter's nonlinear operation. The basic structure, control design, and MATLAB/SIMULINK results are presented. Practical results substantiate the design flexibility of the Cuk-based topology controlled by a TMSF280335 DSP.
UR - http://ieeexplore.ieee.org/document/6777339/
UR - http://www.scopus.com/inward/record.url?scp=84908499055&partnerID=8YFLogxK
U2 - 10.1109/JESTPE.2014.2313185
DO - 10.1109/JESTPE.2014.2313185
M3 - Conference contribution
BT - IEEE Journal of Emerging and Selected Topics in Power Electronics
PB - Institute of Electrical and Electronics Engineers Inc.
ER -
