Coating of reverse osmosis membranes with amphiphilic copolymers for biofouling control

Szilárd S. Bucs*, Rodrigo Valladares Linares, Nadia Farhat, Asif Matin, Zafarullah Khan, Mark C.M. Van Loosdrecht, Rong Yang, Minghui Wang, Karen K. Gleason, Joop C. Kruithof, Johannes S. Vrouwenvelder

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

28 Scopus citations

Abstract

Surface coating of membranes may be a promising option to control biofilm development and biofouling impact on membrane performance of spiral-wound reverse osmosis (RO) systems. The objective of this study was to investigate the impact of an amphiphilic copolymer coating on biofilm formation and biofouling control. The coating was composed of both hydrophilic and hydrophobic monomers hydroxyethyl methacrylate (HEMA) and perfluorodecyl acrylate (PFA), respectively. Commercial RO membranes were coated with HEMA-PFA copolymer film. Long and short term biofouling studies with coated and uncoated membranes and feed spacer were performed using membrane fouling simulators (MFSs) operated in parallel, fed with water containing nutrients. For the long-term studies pressure drop development in time was monitored and after eight days the MFSs were opened and the accumulated biofilm on the membrane and spacer sheets was quantified and characterized. The presence of the membrane coating was determined using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Results showed that the amphiphilic coating (i) delayed biofouling (a lower pressure drop increase by a factor of 3 and a lower accumulated active biomass amount by a factor of 6), (ii) influenced the biofilm composition (23% lower polysaccharides and 132% higher protein content) and (iii) was still completely present on the membrane at the end of the biofouling study, showing that the coating was strongly attached to the membrane surface. Using coated membranes and feed spacers in combination with advanced cleaning strategies may be a suitable way to control biofouling.

Original languageEnglish (US)
Pages (from-to)1-11
Number of pages11
JournalDesalination and Water Treatment
Volume68
DOIs
StatePublished - Mar 2017

Keywords

  • Amphiphilic copolymer
  • Biofilm morphology
  • Biofouling control
  • Membrane coating
  • Membrane surface modification

ASJC Scopus subject areas

  • Water Science and Technology
  • Ocean Engineering
  • Pollution

Fingerprint

Dive into the research topics of 'Coating of reverse osmosis membranes with amphiphilic copolymers for biofouling control'. Together they form a unique fingerprint.

Cite this