Conduction and trapping in electroluminescent polymer devices

A. J. Campbell, M. S. Weaver, D. G. Lidzey, D. D.C. Bradley, E. Werner, W. Brutting, M. Schwoerer

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Abstract

The current-voltage (JV) characteristics of ITO/polymer film/Al or Au devices of poly(phenylene vinylene) (PPV) and a dialkoxy PPV copolymer can be fitted at high applied bias to a power law of the form J = KVm where m increases with decreasing temperature, log(K) is proportional to m, and K is proportional to d-αm where d is the film thickness and α is a constant. α 2 and 1 for the Al and Au cathode devices respectively. Different single carrier space charge limited conduction (SCLC) theories, involving either an exponential trap distribution or a hopping transport field and temperature dependent mobility, are used to try and explain this behaviour. Both models are in good agreement with the general experimental results, but can also be criticized on a number of specific issues. Mixed SCLC models and the effect of dispersive transport are also explored. It is concluded that carrier mobility and trap measurements are required to distinguish between these models. To this end, initial trap measurements of ITO/PPV/Al devices using deep level transient spectroscopy (DLTS) are reported. Very deep positive carrier traps with emptying times >4 minutes have been detected. The non-exponential DLTS transients have been successfully modelled on an isoelectronic trap level emptying to a Gaussian distribution of transport states, with a trap depth and density of 0.8 eV and 4×1016 cm-3 respectively.
Original languageEnglish (US)
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
PublisherSPIEBellingham, WA, United States
StatePublished - Dec 1 1998
Externally publishedYes

Fingerprint

Dive into the research topics of 'Conduction and trapping in electroluminescent polymer devices'. Together they form a unique fingerprint.

Cite this