Design and fabrication of power-efficient VCSEL-based optical transceiver

S. M. Mitani; M. S. Alias; M. F. Maulud; A. A. Manaf; M. R. Yahya; A. F.A. Mat

doi:10.1109/ATC.2008.4760533

Design and fabrication of power-efficient VCSEL-based optical transceiver

S. M. Mitani, M. S. Alias, M. F. Maulud, A. A. Manaf, M. R. Yahya, A. F.A. Mat

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Abstract

This communication presents an analysis of the design and fabrication of power-efficient, low cost VESEL-based optical transceiver proposed for emerging fiber data distributed interface (FDDI) and fiber channel local-area network (FELAN's). This transceiver has been designed to meet the increasing amount of information transmitted through communication networks. The proposed optical transceiver consists of Tx that contains VESEL driver and power control units and Rx that contains trans-impedance amplifier, limiting amplifier as well as automatic gain control. The most important reason to lower the power consumption of optical transceivers is to alleviate the increasing heat dissipation associated with denser opto-electronic (OE) devices. VESEL devices operating at low temperature display decrease jitter, increase output power and enhance lifetime. Also, temperature gradient on large opto-electronic (OE) device arrays generates performance non-uniformities and lowers the bit-error-rate (BER) of the optical links. In addition, lowering the power consumption of optical transceivers contribute to the overall reduction of the system power budget.

Original language	English (US)
Title of host publication	Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting
Pages	117-119
Number of pages	3
DOIs	https://doi.org/10.1109/ATC.2008.4760533
State	Published - 2008
Externally published	Yes
Event	2008 International Conference on Advanced Technologies for Communications, ATC 2008 - Hanoi, Viet Nam Duration: Oct 6 2008 → Oct 9 2008

Publication series

Name	Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting

Other

Other	2008 International Conference on Advanced Technologies for Communications, ATC 2008
Country/Territory	Viet Nam
City	Hanoi
Period	10/6/08 → 10/9/08

Keywords

High speed transmission
Optical connectors
Optical transceivers
VESEL

ASJC Scopus subject areas

Computer Networks and Communications
Electrical and Electronic Engineering
Communication

Access to Document

10.1109/ATC.2008.4760533

Cite this

Mitani, S. M., Alias, M. S., Maulud, M. F., Manaf, A. A., Yahya, M. R., & Mat, A. F. A. (2008). Design and fabrication of power-efficient VCSEL-based optical transceiver. In Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting (pp. 117-119). Article 4760533 (Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting). https://doi.org/10.1109/ATC.2008.4760533

Mitani, S. M. ; Alias, M. S. ; Maulud, M. F. et al. / Design and fabrication of power-efficient VCSEL-based optical transceiver. Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting. 2008. pp. 117-119 (Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting).

@inproceedings{2264cc16ac634cefbc7ef5c6bc5618da,

title = "Design and fabrication of power-efficient VCSEL-based optical transceiver",

abstract = "This communication presents an analysis of the design and fabrication of power-efficient, low cost VESEL-based optical transceiver proposed for emerging fiber data distributed interface (FDDI) and fiber channel local-area network (FELAN's). This transceiver has been designed to meet the increasing amount of information transmitted through communication networks. The proposed optical transceiver consists of Tx that contains VESEL driver and power control units and Rx that contains trans-impedance amplifier, limiting amplifier as well as automatic gain control. The most important reason to lower the power consumption of optical transceivers is to alleviate the increasing heat dissipation associated with denser opto-electronic (OE) devices. VESEL devices operating at low temperature display decrease jitter, increase output power and enhance lifetime. Also, temperature gradient on large opto-electronic (OE) device arrays generates performance non-uniformities and lowers the bit-error-rate (BER) of the optical links. In addition, lowering the power consumption of optical transceivers contribute to the overall reduction of the system power budget.",

keywords = "High speed transmission, Optical connectors, Optical transceivers, VESEL",

author = "Mitani, {S. M.} and Alias, {M. S.} and Maulud, {M. F.} and Manaf, {A. A.} and Yahya, {M. R.} and Mat, {A. F.A.}",

year = "2008",

doi = "10.1109/ATC.2008.4760533",

language = "English (US)",

isbn = "9781424426812",

series = "Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting",

pages = "117--119",

booktitle = "Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting",

note = "2008 International Conference on Advanced Technologies for Communications, ATC 2008 ; Conference date: 06-10-2008 Through 09-10-2008",

}

Mitani, SM, Alias, MS, Maulud, MF, Manaf, AA, Yahya, MR & Mat, AFA 2008, Design and fabrication of power-efficient VCSEL-based optical transceiver. in Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting., 4760533, Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting, pp. 117-119, 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Hanoi, Viet Nam, 10/6/08. https://doi.org/10.1109/ATC.2008.4760533

Design and fabrication of power-efficient VCSEL-based optical transceiver. / Mitani, S. M.; Alias, M. S.; Maulud, M. F. et al.
Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting. 2008. p. 117-119 4760533 (Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and fabrication of power-efficient VCSEL-based optical transceiver

AU - Mitani, S. M.

AU - Alias, M. S.

AU - Maulud, M. F.

AU - Manaf, A. A.

AU - Yahya, M. R.

AU - Mat, A. F.A.

PY - 2008

Y1 - 2008

N2 - This communication presents an analysis of the design and fabrication of power-efficient, low cost VESEL-based optical transceiver proposed for emerging fiber data distributed interface (FDDI) and fiber channel local-area network (FELAN's). This transceiver has been designed to meet the increasing amount of information transmitted through communication networks. The proposed optical transceiver consists of Tx that contains VESEL driver and power control units and Rx that contains trans-impedance amplifier, limiting amplifier as well as automatic gain control. The most important reason to lower the power consumption of optical transceivers is to alleviate the increasing heat dissipation associated with denser opto-electronic (OE) devices. VESEL devices operating at low temperature display decrease jitter, increase output power and enhance lifetime. Also, temperature gradient on large opto-electronic (OE) device arrays generates performance non-uniformities and lowers the bit-error-rate (BER) of the optical links. In addition, lowering the power consumption of optical transceivers contribute to the overall reduction of the system power budget.

AB - This communication presents an analysis of the design and fabrication of power-efficient, low cost VESEL-based optical transceiver proposed for emerging fiber data distributed interface (FDDI) and fiber channel local-area network (FELAN's). This transceiver has been designed to meet the increasing amount of information transmitted through communication networks. The proposed optical transceiver consists of Tx that contains VESEL driver and power control units and Rx that contains trans-impedance amplifier, limiting amplifier as well as automatic gain control. The most important reason to lower the power consumption of optical transceivers is to alleviate the increasing heat dissipation associated with denser opto-electronic (OE) devices. VESEL devices operating at low temperature display decrease jitter, increase output power and enhance lifetime. Also, temperature gradient on large opto-electronic (OE) device arrays generates performance non-uniformities and lowers the bit-error-rate (BER) of the optical links. In addition, lowering the power consumption of optical transceivers contribute to the overall reduction of the system power budget.

KW - High speed transmission

KW - Optical connectors

KW - Optical transceivers

KW - VESEL

UR - http://www.scopus.com/inward/record.url?scp=63149115300&partnerID=8YFLogxK

U2 - 10.1109/ATC.2008.4760533

DO - 10.1109/ATC.2008.4760533

M3 - Conference contribution

AN - SCOPUS:63149115300

SN - 9781424426812

T3 - Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting

SP - 117

EP - 119

BT - Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting

T2 - 2008 International Conference on Advanced Technologies for Communications, ATC 2008

Y2 - 6 October 2008 through 9 October 2008

ER -

Mitani SM, Alias MS, Maulud MF, Manaf AA, Yahya MR, Mat AFA. Design and fabrication of power-efficient VCSEL-based optical transceiver. In Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting. 2008. p. 117-119. 4760533. (Proceedings - 2008 International Conference on Advanced Technologies for Communications, ATC 2008, Held in Conjunction with REV Meeting). doi: 10.1109/ATC.2008.4760533

Design and fabrication of power-efficient VCSEL-based optical transceiver

Abstract

Publication series

Other

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this