Dimethyl ether low-temperature catalytic oxidation over Rh/Al2O3 in a stagnation-flow reactor

Nawaf M. Alghamdi*, S. Mani Sarathy

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

Abstract

Dimethyl ether (DME) is a promising fuel for use in low-temperature portable hydrogen production, domestic applications, or diesel engines. It burns with less emissions than conventional fuels and has properties similar to LPG in terms of storage and transport, rendering it effective in many strategies for combating climate change. In this study we investigated the partial and total oxidation of DME over 5 wt% Rh/Al2O3 at low temperatures (215 to 320 °C), relevant to portable and domestic energy applications as well as the after-treatment systems of DME-powered engines. We captured the effects of temperature, flow rate, and inlet feed composition on the reactivity. For partial oxidation, we utilized the stagnation-flow reactor geometry to isolate the oxidation zone from the reforming zone. We discuss the reaction order with respect to DME and O2 and provide activation energy values under kinetics control. We also provide data where internal and external mass transfer limitations are present to examine the diffusive-convective transport near the catalyst surface, not easily done in three-dimensional environments such as packed beds. The experimental data we provide here pave the way for accurate kinetic modeling of DME partial and total oxidation on Rh/Al2O3, for reactor design and optimization as well as rational catalyst design.

Original languageEnglish (US)
Article number127302
JournalFuel
Volume338
DOIs
StatePublished - Apr 15 2023

Keywords

  • Dimethyl ether
  • Kinetics
  • Oxidation
  • Partial oxidation
  • Rhodium
  • Stagnation-flow

ASJC Scopus subject areas

  • General Chemical Engineering
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Organic Chemistry

Fingerprint

Dive into the research topics of 'Dimethyl ether low-temperature catalytic oxidation over Rh/Al2O3 in a stagnation-flow reactor'. Together they form a unique fingerprint.

Cite this