Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices

Jiaming Zhang; Andres A. Aguirre-Pablo; Erqiang Li; Ulrich Buttner; Sigurdur T Thoroddsen

doi:10.1039/c6ra11724d

Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices

Jiaming Zhang, Andres A. Aguirre-Pablo, Erqiang Li, Ulrich Buttner, Sigurdur T Thoroddsen

Research output: Contribution to journal › Article › peer-review

45 Scopus citations

Abstract

Droplet-based microfluidics is a rapidly growing field of research and involves various applications from chemistry to biology. Droplet generation techniques become the pre-requisite focus. Additive manufacturing (3D printing) technology has recently been exploited in microfluidics due to its simplicity and low cost. However, only relatively large droplets can be produced in current 3D-printed droplet generators, due to the channel dimension limitations on how fine a channel can be 3D-printed. Here we report a novel design of a 3D-printed

Original language	English (US)
Pages (from-to)	81120-81129
Number of pages	10
Journal	RSC Adv.
Volume	6
Issue number	84
DOIs	https://doi.org/10.1039/c6ra11724d
State	Published - 2016

Access to Document

10.1039/c6ra11724d

Cite this

@article{6474746e33f4420ebe2e2e686e10cb10,

title = "Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices",

abstract = "Droplet-based microfluidics is a rapidly growing field of research and involves various applications from chemistry to biology. Droplet generation techniques become the pre-requisite focus. Additive manufacturing (3D printing) technology has recently been exploited in microfluidics due to its simplicity and low cost. However, only relatively large droplets can be produced in current 3D-printed droplet generators, due to the channel dimension limitations on how fine a channel can be 3D-printed. Here we report a novel design of a 3D-printed",

author = "Jiaming Zhang and Aguirre-Pablo, {Andres A.} and Erqiang Li and Ulrich Buttner and Thoroddsen, {Sigurdur T}",

note = "KAUST Repository Item: Exported on 2020-10-01 Acknowledgements: Research reported in this publication was supported by King Abdullah University of Science and Technology (KAUST). We also thank KAUST Microfluidics Thrust Area Labs for the access to the 3D-printer.",

year = "2016",

doi = "10.1039/c6ra11724d",

language = "English (US)",

volume = "6",

pages = "81120--81129",

journal = "RSC Adv.",

issn = "2046-2069",

publisher = "Royal Society of Chemistry",

number = "84",

}

TY - JOUR

T1 - Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices

AU - Zhang, Jiaming

AU - Aguirre-Pablo, Andres A.

AU - Li, Erqiang

AU - Buttner, Ulrich

AU - Thoroddsen, Sigurdur T

N1 - KAUST Repository Item: Exported on 2020-10-01 Acknowledgements: Research reported in this publication was supported by King Abdullah University of Science and Technology (KAUST). We also thank KAUST Microfluidics Thrust Area Labs for the access to the 3D-printer.

PY - 2016

Y1 - 2016

N2 - Droplet-based microfluidics is a rapidly growing field of research and involves various applications from chemistry to biology. Droplet generation techniques become the pre-requisite focus. Additive manufacturing (3D printing) technology has recently been exploited in microfluidics due to its simplicity and low cost. However, only relatively large droplets can be produced in current 3D-printed droplet generators, due to the channel dimension limitations on how fine a channel can be 3D-printed. Here we report a novel design of a 3D-printed

AB - Droplet-based microfluidics is a rapidly growing field of research and involves various applications from chemistry to biology. Droplet generation techniques become the pre-requisite focus. Additive manufacturing (3D printing) technology has recently been exploited in microfluidics due to its simplicity and low cost. However, only relatively large droplets can be produced in current 3D-printed droplet generators, due to the channel dimension limitations on how fine a channel can be 3D-printed. Here we report a novel design of a 3D-printed

UR - http://hdl.handle.net/10754/622391

UR - http://pubs.rsc.org/en/Content/ArticleLanding/2016/RA/C6RA11724D

UR - http://www.scopus.com/inward/record.url?scp=84984986370&partnerID=8YFLogxK

U2 - 10.1039/c6ra11724d

DO - 10.1039/c6ra11724d

M3 - Article

SN - 2046-2069

VL - 6

SP - 81120

EP - 81129

JO - RSC Adv.

JF - RSC Adv.

IS - 84

ER -

Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices

Abstract

Access to Document

Other files and links

Fingerprint

Cite this