TY - JOUR
T1 - Dynamic water management of polymer electrolyte membrane fuel cells using intermittent RH control
AU - Hussaini, I.S.
AU - Wang, C.Y.
N1 - KAUST Repository Item: Exported on 2020-10-01
Acknowledgements: Partial support of this work by Ford Motor Co. through a University Research Program is gratefully acknowledged. I.S.H. also acknowledges King Abdullah University of Science and Technology (KAUST), Saudi Arabia for a fellowship award.
This publication acknowledges KAUST support, but has no KAUST affiliated authors.
PY - 2010/6
Y1 - 2010/6
N2 - A novel method of water management of polymer electrolyte membrane (PEM) fuel cells using intermittent humidification is presented in this study. The goal is to maintain the membrane close to full humidification, while eliminating channel flooding. The entire cycle is divided into four stages: saturation and de-saturation of the gas diffusion layer followed by de-hydration and hydration of membrane. By controlling the duration of dry and humid flows, it is shown that the cell voltage can be maintained within a narrow band. The technique is applied on experimental test cells using both plain and hydrophobic materials for the gas diffusion layer and an improvement in performance as compared to steady humidification is demonstrated. Duration of dry and humid flows is determined experimentally for several operating conditions. © 2010 Elsevier B.V. All rights reserved.
AB - A novel method of water management of polymer electrolyte membrane (PEM) fuel cells using intermittent humidification is presented in this study. The goal is to maintain the membrane close to full humidification, while eliminating channel flooding. The entire cycle is divided into four stages: saturation and de-saturation of the gas diffusion layer followed by de-hydration and hydration of membrane. By controlling the duration of dry and humid flows, it is shown that the cell voltage can be maintained within a narrow band. The technique is applied on experimental test cells using both plain and hydrophobic materials for the gas diffusion layer and an improvement in performance as compared to steady humidification is demonstrated. Duration of dry and humid flows is determined experimentally for several operating conditions. © 2010 Elsevier B.V. All rights reserved.
UR - http://hdl.handle.net/10754/598030
UR - https://linkinghub.elsevier.com/retrieve/pii/S0378775310000406
UR - http://www.scopus.com/inward/record.url?scp=76349086890&partnerID=8YFLogxK
U2 - 10.1016/j.jpowsour.2009.12.112
DO - 10.1016/j.jpowsour.2009.12.112
M3 - Article
SN - 0378-7753
VL - 195
SP - 3822
EP - 3829
JO - Journal of Power Sources
JF - Journal of Power Sources
IS - 12
ER -