Fluorinated Amphiphilic Polymers and Their Blends for Fouling-Release Applications: The Benefits of a Triblock Copolymer Surface

Harihara S. Sundaram; Youngjin Cho; Michael D. Dimitriou; John A. Finlay; Gemma Cone; Sam Williams; Dale Handlin; Joseph Gatto; Maureen E. Callow; James A. Callow; Edward J. Kramer; Christopher K. Ober

doi:10.1021/am200529u

Fluorinated Amphiphilic Polymers and Their Blends for Fouling-Release Applications: The Benefits of a Triblock Copolymer Surface

Harihara S. Sundaram, Youngjin Cho, Michael D. Dimitriou, John A. Finlay, Gemma Cone, Sam Williams, Dale Handlin, Joseph Gatto, Maureen E. Callow, James A. Callow, Edward J. Kramer, Christopher K. Ober

Research output: Contribution to journal › Article › peer-review

100 Scopus citations

Abstract

Surface active triblock copolymers (SABC) with mixed polyethylene glycol (PEG) and two different semifluorinated alcohol side chains, one longer than the other, were blended with a soft thermoplastic elastomer (TPE), polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS). The surface composition of these blends was probed by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The surface reconstruction of the coatings in water was monitored qualitatively by dynamic water contact angles in air as well as air bubble contact angle measurements in water. By blending the SABC with SEBS, we minimize the amount of the SABC used while achieving a surface that is not greatly different in composition from the pure SABC. The 15 wt % blends of the SABC with long fluoroalkyl side chains showed a composition close to that of the pure SABC while the SABC with shorter perfluoroakyl side chains did not. These differences in surface composition were reflected in the fouling-release performance of the blends for the algae, Ulva and Navicula. © 2011 American Chemical Society.

Original language	English (US)
Pages (from-to)	3366-3374
Number of pages	9
Journal	ACS Applied Materials & Interfaces
Volume	3
Issue number	9
DOIs	https://doi.org/10.1021/am200529u
State	Published - Sep 12 2011
Externally published	Yes

Access to Document

10.1021/am200529u

Cite this

Sundaram, H. S., Cho, Y., Dimitriou, M. D., Finlay, J. A., Cone, G., Williams, S., Handlin, D., Gatto, J., Callow, M. E., Callow, J. A., Kramer, E. J., & Ober, C. K. (2011). Fluorinated Amphiphilic Polymers and Their Blends for Fouling-Release Applications: The Benefits of a Triblock Copolymer Surface. ACS Applied Materials & Interfaces, 3(9), 3366-3374. https://doi.org/10.1021/am200529u

@article{e499c286cf7b452891c0c4caeba82cc8,

title = "Fluorinated Amphiphilic Polymers and Their Blends for Fouling-Release Applications: The Benefits of a Triblock Copolymer Surface",

abstract = "Surface active triblock copolymers (SABC) with mixed polyethylene glycol (PEG) and two different semifluorinated alcohol side chains, one longer than the other, were blended with a soft thermoplastic elastomer (TPE), polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS). The surface composition of these blends was probed by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The surface reconstruction of the coatings in water was monitored qualitatively by dynamic water contact angles in air as well as air bubble contact angle measurements in water. By blending the SABC with SEBS, we minimize the amount of the SABC used while achieving a surface that is not greatly different in composition from the pure SABC. The 15 wt % blends of the SABC with long fluoroalkyl side chains showed a composition close to that of the pure SABC while the SABC with shorter perfluoroakyl side chains did not. These differences in surface composition were reflected in the fouling-release performance of the blends for the algae, Ulva and Navicula. {\textcopyright} 2011 American Chemical Society.",

author = "Sundaram, {Harihara S.} and Youngjin Cho and Dimitriou, {Michael D.} and Finlay, {John A.} and Gemma Cone and Sam Williams and Dale Handlin and Joseph Gatto and Callow, {Maureen E.} and Callow, {James A.} and Kramer, {Edward J.} and Ober, {Christopher K.}",

note = "KAUST Repository Item: Exported on 2020-10-01 Acknowledgements: This work was primarily supported by NanoSurfaces Inc (SHS). Partial support was provided by the U.S. Department of Defense's Strategic Environmental Research and Development Program (SERDP), grant WP #1454, with additional support from the Office of Naval Research (ONR) through awards #N00014-08-1-0010 (J.A.C. and M.E.C.) and N00014-02-1-0170 (C.K.O. and E.J.K.). Partial support from the Cornell KAUST Center is also acknowledged. E.J.K. and M.D.D. acknowledge partial support from the NSF Polymers Program (DMR-0704539) as well as the use of central facilities funded by the NSF-MRSEC program (UCSB MRL, DMR-0520415). This publication acknowledges KAUST support, but has no KAUST affiliated authors.",

year = "2011",

month = sep,

day = "12",

doi = "10.1021/am200529u",

language = "English (US)",

volume = "3",

pages = "3366--3374",

journal = "ACS Applied Materials & Interfaces",

issn = "1944-8244",

publisher = "American Chemical Society",

number = "9",

}

Sundaram, HS, Cho, Y, Dimitriou, MD, Finlay, JA, Cone, G, Williams, S, Handlin, D, Gatto, J, Callow, ME, Callow, JA, Kramer, EJ & Ober, CK 2011, 'Fluorinated Amphiphilic Polymers and Their Blends for Fouling-Release Applications: The Benefits of a Triblock Copolymer Surface', ACS Applied Materials & Interfaces, vol. 3, no. 9, pp. 3366-3374. https://doi.org/10.1021/am200529u

TY - JOUR

T1 - Fluorinated Amphiphilic Polymers and Their Blends for Fouling-Release Applications: The Benefits of a Triblock Copolymer Surface

AU - Sundaram, Harihara S.

AU - Cho, Youngjin

AU - Dimitriou, Michael D.

AU - Finlay, John A.

AU - Cone, Gemma

AU - Williams, Sam

AU - Handlin, Dale

AU - Gatto, Joseph

AU - Callow, Maureen E.

AU - Callow, James A.

AU - Kramer, Edward J.

AU - Ober, Christopher K.

N1 - KAUST Repository Item: Exported on 2020-10-01 Acknowledgements: This work was primarily supported by NanoSurfaces Inc (SHS). Partial support was provided by the U.S. Department of Defense's Strategic Environmental Research and Development Program (SERDP), grant WP #1454, with additional support from the Office of Naval Research (ONR) through awards #N00014-08-1-0010 (J.A.C. and M.E.C.) and N00014-02-1-0170 (C.K.O. and E.J.K.). Partial support from the Cornell KAUST Center is also acknowledged. E.J.K. and M.D.D. acknowledge partial support from the NSF Polymers Program (DMR-0704539) as well as the use of central facilities funded by the NSF-MRSEC program (UCSB MRL, DMR-0520415). This publication acknowledges KAUST support, but has no KAUST affiliated authors.

PY - 2011/9/12

Y1 - 2011/9/12

N2 - Surface active triblock copolymers (SABC) with mixed polyethylene glycol (PEG) and two different semifluorinated alcohol side chains, one longer than the other, were blended with a soft thermoplastic elastomer (TPE), polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS). The surface composition of these blends was probed by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The surface reconstruction of the coatings in water was monitored qualitatively by dynamic water contact angles in air as well as air bubble contact angle measurements in water. By blending the SABC with SEBS, we minimize the amount of the SABC used while achieving a surface that is not greatly different in composition from the pure SABC. The 15 wt % blends of the SABC with long fluoroalkyl side chains showed a composition close to that of the pure SABC while the SABC with shorter perfluoroakyl side chains did not. These differences in surface composition were reflected in the fouling-release performance of the blends for the algae, Ulva and Navicula. © 2011 American Chemical Society.

AB - Surface active triblock copolymers (SABC) with mixed polyethylene glycol (PEG) and two different semifluorinated alcohol side chains, one longer than the other, were blended with a soft thermoplastic elastomer (TPE), polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS). The surface composition of these blends was probed by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The surface reconstruction of the coatings in water was monitored qualitatively by dynamic water contact angles in air as well as air bubble contact angle measurements in water. By blending the SABC with SEBS, we minimize the amount of the SABC used while achieving a surface that is not greatly different in composition from the pure SABC. The 15 wt % blends of the SABC with long fluoroalkyl side chains showed a composition close to that of the pure SABC while the SABC with shorter perfluoroakyl side chains did not. These differences in surface composition were reflected in the fouling-release performance of the blends for the algae, Ulva and Navicula. © 2011 American Chemical Society.

UR - http://hdl.handle.net/10754/598347

UR - https://pubs.acs.org/doi/10.1021/am200529u

UR - http://www.scopus.com/inward/record.url?scp=84863945302&partnerID=8YFLogxK

U2 - 10.1021/am200529u

DO - 10.1021/am200529u

M3 - Article

C2 - 21830813

SN - 1944-8244

VL - 3

SP - 3366

EP - 3374

JO - ACS Applied Materials & Interfaces

JF - ACS Applied Materials & Interfaces

IS - 9

ER -

Fluorinated Amphiphilic Polymers and Their Blends for Fouling-Release Applications: The Benefits of a Triblock Copolymer Surface

Abstract

Access to Document

Other files and links

Fingerprint

Cite this