Flux dependency of particulate/colloidal fouling in seawater reverse osmosis systems

S. G. Salinas Rodríguez, Maria Dolores Kennedy, Gary L. Amy, Jan Cornelis Schippers

Research output: Contribution to journalArticlepeer-review

15 Scopus citations

Abstract

Fouling is the main operational problem in seawater reverse osmosis systems (SWRO). Particulate fouling is traditionally measured through the silt density index (SDI) and through the modified fouling index (MFI). In recent years, ultrafiltration membranes were used successfully at constant flux-MFI-UF-to measure particulate/colloidal fouling potential and tested in sea water applications. Furthermore, constant flux operation allows predicting the rate of fouling in RO systems. The objectives of this study are: (1) to measure the flux effect in MFI-UF with different membranes (100, 30 and 10 kDa) for raw seawater and pre-treated water before reverse osmosis in three different locations; (2) to study the particulate and colloidal fouling potential of seawater in reverse osmosis systems; (3) to project the increase in pressure due to cake resistance in reverse osmosis systems. In this research, flat ultrafiltration membranes (100, 50, 30 and 10 kDa) are used in a con- stant flux filtration mode to test and compare real seawaters from various locations (North and Mediterranean Sea) and from various full scale facilities including different pre-treatments (i.e., ultrafiltration and coagulation + dual media filtration). The operated fluxes range from 350 down to values close to real RO operation, 15l(m2h)-1. After each filtration test, the MFI-UF is calculated to assess the particulate fouling potential. The obtained results showed that: (1) the particulate and colloidal fouling potential is directly proportional to the applied flux during filtration. This proportionality is related to the compression of the cake deposit occurring at high flux values; (2) the higher the flux, the higher the required pressure, the less porous the cake and therefore the higher the specific cake resistance; (3) particulate and colloidal fouling potential of seawater is site specific and is influenced by pre-treatment. © 2012 Desalination Publications. All rights reserved.
Original languageEnglish (US)
Pages (from-to)155-162
Number of pages8
JournalDesalination and Water Treatment
Volume42
Issue number1-3
DOIs
StatePublished - Jan 1 2012

ASJC Scopus subject areas

  • Pollution
  • Water Science and Technology
  • Ocean Engineering

Fingerprint

Dive into the research topics of 'Flux dependency of particulate/colloidal fouling in seawater reverse osmosis systems'. Together they form a unique fingerprint.

Cite this