TY - JOUR
T1 - Kinematic dilation during the hydraulic stimulation of pre-fractured rocks
AU - Roshankhah, S.
AU - Cruz, L. G.
AU - Shin, H.
AU - Lizcano, A.
AU - Santamarina, Carlos
N1 - KAUST Repository Item: Exported on 2020-10-01
Acknowledgements: Support for this research was provided by the US Department of Energy and the King Abdullah University of Science and Technology endowment. G. Abelskamp edited the manuscript.
PY - 2019/7/5
Y1 - 2019/7/5
N2 - A single planar fracture geometry dominates the process of hydraulic fracturing in homogeneous, isotropic and cohesive materials. However, this fracture geometry cannot explain the high recovery efficiency observed in shale gas and enhanced geothermal energy. Experimental and numerical studies reported here demonstrate that pre-fractured, structured reservoirs experience extensive geometric distortion and dilation around the main opening-mode discontinuity generated by high-pressure fluid injection. This kinematic dilation may decrease at high confining stresses because blocks deform and split. Parameters such as the dominant fracture set orientation, block size and slenderness and blocks overlap length characterise a pre-structured medium and determine its deformation pattern and hydromechanical behaviour. Kinematically controlled dilational distortion greatly improves fluid conductivity in the pre-structured medium. A sixth-power relationship is anticipated between the enhanced hydraulic conductivity and the roundness of the main opening.
AB - A single planar fracture geometry dominates the process of hydraulic fracturing in homogeneous, isotropic and cohesive materials. However, this fracture geometry cannot explain the high recovery efficiency observed in shale gas and enhanced geothermal energy. Experimental and numerical studies reported here demonstrate that pre-fractured, structured reservoirs experience extensive geometric distortion and dilation around the main opening-mode discontinuity generated by high-pressure fluid injection. This kinematic dilation may decrease at high confining stresses because blocks deform and split. Parameters such as the dominant fracture set orientation, block size and slenderness and blocks overlap length characterise a pre-structured medium and determine its deformation pattern and hydromechanical behaviour. Kinematically controlled dilational distortion greatly improves fluid conductivity in the pre-structured medium. A sixth-power relationship is anticipated between the enhanced hydraulic conductivity and the roundness of the main opening.
UR - http://hdl.handle.net/10754/659068
UR - https://www.icevirtuallibrary.com/doi/10.1680/jgele.18.00173
UR - http://www.scopus.com/inward/record.url?scp=85072886292&partnerID=8YFLogxK
U2 - 10.1680/jgele.18.00173
DO - 10.1680/jgele.18.00173
M3 - Article
SN - 2045-2543
VL - 9
SP - 186
EP - 192
JO - Geotechnique Letters
JF - Geotechnique Letters
IS - 3
ER -