TY - JOUR
T1 - Kinetics of toluene alkylation with methanol catalyzed by pure and hybridized HZSM-5 catalysts
AU - Alabi, Wahab
AU - Atanda, Luqman
AU - Jermy, Rabindran
AU - Al-Khattaf, Sulaiman
N1 - KAUST Repository Item: Exported on 2020-10-01
Acknowledgements: The authors wish to appreciate the support of King Abdullah University of Science and Technology (KAUST). Also, the support of King Fahd University of Petroleum and Minerals is highly appreciated. Technical support by Mr. Mariano Gica in the catalytic testing is very much appreciated.
This publication acknowledges KAUST support, but has no KAUST affiliated authors.
PY - 2012/7
Y1 - 2012/7
N2 - A kinetic study of toluene alkylation with methanol was performed over pure HZSM-5, mordenite/ZSM-5 (hybrid of mordenite and HZSM-5), and ZM13 (composite mixture of HZSM-5 and MCM-41 at pH 13). Experimental runs were conducted using a batch fluidized bed reactor at temperatures of 300, 350 and 400 °C and reaction times of 3, 5, 7, 10, 13, 15 and 20. s. The rate of toluene methylation and toluene disproportionation were studied on the three catalysts (toluene alkylation is usually accompanied by toluene disproportionation on acid catalyst). Based on the results obtained, a simplified power law kinetic model consisting of three reactions was developed to estimate the activation energies of toluene methylation and disproportionation simultaneously. Coke formation on catalysts was accounted for using both reaction time and reactant conversion decay functions. All parameters were estimated based on quasi-steady state approximation. Estimated kinetic parameters were in good agreement with experimental results. The order of alkylation ability of the catalysts was found to be ZM13 > HZSM-5 > mordenite/ZSM-5, while the reverse is for toluene disproportionation (mordenite/ZSM-5 > HZSM-5 > ZM13). Thus, alkylation of toluene is most favorable on ZM13 due to combined effect of mesoporosity induced through its synthetic route and acid content. Toluene/MeOH molar ratio of 1:1 was most suitable for toluene alkylation reaction. © 2012 Elsevier B.V.
AB - A kinetic study of toluene alkylation with methanol was performed over pure HZSM-5, mordenite/ZSM-5 (hybrid of mordenite and HZSM-5), and ZM13 (composite mixture of HZSM-5 and MCM-41 at pH 13). Experimental runs were conducted using a batch fluidized bed reactor at temperatures of 300, 350 and 400 °C and reaction times of 3, 5, 7, 10, 13, 15 and 20. s. The rate of toluene methylation and toluene disproportionation were studied on the three catalysts (toluene alkylation is usually accompanied by toluene disproportionation on acid catalyst). Based on the results obtained, a simplified power law kinetic model consisting of three reactions was developed to estimate the activation energies of toluene methylation and disproportionation simultaneously. Coke formation on catalysts was accounted for using both reaction time and reactant conversion decay functions. All parameters were estimated based on quasi-steady state approximation. Estimated kinetic parameters were in good agreement with experimental results. The order of alkylation ability of the catalysts was found to be ZM13 > HZSM-5 > mordenite/ZSM-5, while the reverse is for toluene disproportionation (mordenite/ZSM-5 > HZSM-5 > ZM13). Thus, alkylation of toluene is most favorable on ZM13 due to combined effect of mesoporosity induced through its synthetic route and acid content. Toluene/MeOH molar ratio of 1:1 was most suitable for toluene alkylation reaction. © 2012 Elsevier B.V.
UR - http://hdl.handle.net/10754/600109
UR - https://linkinghub.elsevier.com/retrieve/pii/S1385894712005645
UR - http://www.scopus.com/inward/record.url?scp=84862729590&partnerID=8YFLogxK
U2 - 10.1016/j.cej.2012.04.100
DO - 10.1016/j.cej.2012.04.100
M3 - Article
SN - 1385-8947
VL - 195-196
SP - 276
EP - 288
JO - Chemical Engineering Journal
JF - Chemical Engineering Journal
ER -