Monolithic porous polymer stationary phases in polyimide chips for the fast high-performance liquid chromatography separation of proteins and peptides

Pavel A. Levkin; Sebastiaan Eeltink; Thomas R. Stratton; Reid Brennen; Karla Robotti; Hongfeng Yin; Kevin Killeen; Frantisek Svec; Jean M.J. Fréchet

doi:10.1016/j.chroma.2008.03.025

Monolithic porous polymer stationary phases in polyimide chips for the fast high-performance liquid chromatography separation of proteins and peptides

Pavel A. Levkin, Sebastiaan Eeltink, Thomas R. Stratton, Reid Brennen, Karla Robotti, Hongfeng Yin, Kevin Killeen, Frantisek Svec, Jean M.J. Fréchet^*

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

108 Scopus citations

Abstract

Poly(lauryl methacrylate-co-ethylene dimethacrylate) and poly(styrene-co-divinylbenzene) stationary phases in monolithic format have been prepared by thermally initiated free radical polymerization within polyimide chips featuring channels having a cross-section of 200 μm × 200 μm and a length of 6.8 cm. These chips were then used for the separation of a mixture of proteins including ribonuclease A, myoglobin, cytochrome c, and ovalbumin, as well as peptides. The separations were monitored by UV adsorption. Both the monolithic phases based on methacrylate and on styrene chemistries enabled the rapid baseline separation of most of the test mixtures. Best performance was achieved with the styrenic monolith leading to fast baseline separation of all four proteins in less than 2.5 min. The in situ monolith preparation process affords microfluidic devices exhibiting good batch-to-batch and injection-to-injection repeatability.

Original language	English (US)
Pages (from-to)	55-61
Number of pages	7
Journal	Journal of Chromatography A
Volume	1200
Issue number	1
DOIs	https://doi.org/10.1016/j.chroma.2008.03.025
State	Published - Jul 18 2008
Externally published	Yes

Keywords

Chip
HPLC
Microfluidics
Monoliths
Peptide separation
Protein separation
Proteomics
Stationary phase

ASJC Scopus subject areas

Analytical Chemistry
Biochemistry
Organic Chemistry

Access to Document

10.1016/j.chroma.2008.03.025

Cite this

Levkin, P. A., Eeltink, S., Stratton, T. R., Brennen, R., Robotti, K., Yin, H., Killeen, K., Svec, F., & Fréchet, J. M. J. (2008). Monolithic porous polymer stationary phases in polyimide chips for the fast high-performance liquid chromatography separation of proteins and peptides. Journal of Chromatography A, 1200(1), 55-61. https://doi.org/10.1016/j.chroma.2008.03.025

@article{7e09fbfa43df419bbb5c74564dccf7e1,

title = "Monolithic porous polymer stationary phases in polyimide chips for the fast high-performance liquid chromatography separation of proteins and peptides",

abstract = "Poly(lauryl methacrylate-co-ethylene dimethacrylate) and poly(styrene-co-divinylbenzene) stationary phases in monolithic format have been prepared by thermally initiated free radical polymerization within polyimide chips featuring channels having a cross-section of 200 μm × 200 μm and a length of 6.8 cm. These chips were then used for the separation of a mixture of proteins including ribonuclease A, myoglobin, cytochrome c, and ovalbumin, as well as peptides. The separations were monitored by UV adsorption. Both the monolithic phases based on methacrylate and on styrene chemistries enabled the rapid baseline separation of most of the test mixtures. Best performance was achieved with the styrenic monolith leading to fast baseline separation of all four proteins in less than 2.5 min. The in situ monolith preparation process affords microfluidic devices exhibiting good batch-to-batch and injection-to-injection repeatability.",

keywords = "Chip, HPLC, Microfluidics, Monoliths, Peptide separation, Protein separation, Proteomics, Stationary phase",

author = "Levkin, {Pavel A.} and Sebastiaan Eeltink and Stratton, {Thomas R.} and Reid Brennen and Karla Robotti and Hongfeng Yin and Kevin Killeen and Frantisek Svec and Fr{\'e}chet, {Jean M.J.}",

note = "Funding Information: Support of this research by a grant of the National Institute of Biomedical Imaging and Bioengineering, National Institutes of Health (EB-006133) is gratefully acknowledged. Measurement work at the Molecular Foundry was supported by the Director, Office of Science, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, of the US Department of Energy under Contract No. DE-AC02-05CH11231. T.S. is grateful to the US Department of Homeland Security for a scholarship. Agilent Technologies, Inc. is acknowledged for kindly supplying chip-related instrumentation and Debbie Ritchey at Agilent Laboratories is thanked for fabricating the prototype chips we used. ",

year = "2008",

month = jul,

day = "18",

doi = "10.1016/j.chroma.2008.03.025",

language = "English (US)",

volume = "1200",

pages = "55--61",

journal = "Journal of Chromatography A",

issn = "0021-9673",

publisher = "Elsevier",

number = "1",

}

TY - JOUR

T1 - Monolithic porous polymer stationary phases in polyimide chips for the fast high-performance liquid chromatography separation of proteins and peptides

AU - Levkin, Pavel A.

AU - Eeltink, Sebastiaan

AU - Stratton, Thomas R.

AU - Brennen, Reid

AU - Robotti, Karla

AU - Yin, Hongfeng

AU - Killeen, Kevin

AU - Svec, Frantisek

AU - Fréchet, Jean M.J.

N1 - Funding Information: Support of this research by a grant of the National Institute of Biomedical Imaging and Bioengineering, National Institutes of Health (EB-006133) is gratefully acknowledged. Measurement work at the Molecular Foundry was supported by the Director, Office of Science, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, of the US Department of Energy under Contract No. DE-AC02-05CH11231. T.S. is grateful to the US Department of Homeland Security for a scholarship. Agilent Technologies, Inc. is acknowledged for kindly supplying chip-related instrumentation and Debbie Ritchey at Agilent Laboratories is thanked for fabricating the prototype chips we used.

PY - 2008/7/18

Y1 - 2008/7/18

N2 - Poly(lauryl methacrylate-co-ethylene dimethacrylate) and poly(styrene-co-divinylbenzene) stationary phases in monolithic format have been prepared by thermally initiated free radical polymerization within polyimide chips featuring channels having a cross-section of 200 μm × 200 μm and a length of 6.8 cm. These chips were then used for the separation of a mixture of proteins including ribonuclease A, myoglobin, cytochrome c, and ovalbumin, as well as peptides. The separations were monitored by UV adsorption. Both the monolithic phases based on methacrylate and on styrene chemistries enabled the rapid baseline separation of most of the test mixtures. Best performance was achieved with the styrenic monolith leading to fast baseline separation of all four proteins in less than 2.5 min. The in situ monolith preparation process affords microfluidic devices exhibiting good batch-to-batch and injection-to-injection repeatability.

AB - Poly(lauryl methacrylate-co-ethylene dimethacrylate) and poly(styrene-co-divinylbenzene) stationary phases in monolithic format have been prepared by thermally initiated free radical polymerization within polyimide chips featuring channels having a cross-section of 200 μm × 200 μm and a length of 6.8 cm. These chips were then used for the separation of a mixture of proteins including ribonuclease A, myoglobin, cytochrome c, and ovalbumin, as well as peptides. The separations were monitored by UV adsorption. Both the monolithic phases based on methacrylate and on styrene chemistries enabled the rapid baseline separation of most of the test mixtures. Best performance was achieved with the styrenic monolith leading to fast baseline separation of all four proteins in less than 2.5 min. The in situ monolith preparation process affords microfluidic devices exhibiting good batch-to-batch and injection-to-injection repeatability.

KW - Chip

KW - HPLC

KW - Microfluidics

KW - Monoliths

KW - Peptide separation

KW - Protein separation

KW - Proteomics

KW - Stationary phase

UR - http://www.scopus.com/inward/record.url?scp=45649085109&partnerID=8YFLogxK

U2 - 10.1016/j.chroma.2008.03.025

DO - 10.1016/j.chroma.2008.03.025

M3 - Article

C2 - 18374934

AN - SCOPUS:45649085109

SN - 0021-9673

VL - 1200

SP - 55

EP - 61

JO - Journal of Chromatography A

JF - Journal of Chromatography A

IS - 1

ER -

Monolithic porous polymer stationary phases in polyimide chips for the fast high-performance liquid chromatography separation of proteins and peptides

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this