TY - GEN
T1 - Multifrequency Excitation of a Clamped-Clamped Microbeam
AU - Jaber, Nizar
AU - Ramini, Abdallah
AU - Younis, Mohammad I.
N1 - KAUST Repository Item: Exported on 2020-10-01
PY - 2016/1/20
Y1 - 2016/1/20
N2 - We present analytical and experimental investigation of an electrically actuated clamped-clamped microbeam under a twosource harmonic excitation. The first frequency is swept around the first mode of vibration where the second one is fixed. These microbeams are fabricated using polyimide as structural layer coated with nickel form top and chromium and gold layers from bottom. We demonstrate the excitation of additive and subtractive type resonance. We show that by properly tuning the frequency and the amplitude of the excitation force, the frequency bandwidth of the resonator is increased. Theoretically, we solved the eigenvalue problem for different axial forces to find the natural frequencies ratio that match the experimental values. Using Galerkin method, a reduced order model is derived to simulate the static and dynamic response of the device where using three symmetric mode shapes provided a good agreement with experimental data. © Copyright 2015 by ASME.
AB - We present analytical and experimental investigation of an electrically actuated clamped-clamped microbeam under a twosource harmonic excitation. The first frequency is swept around the first mode of vibration where the second one is fixed. These microbeams are fabricated using polyimide as structural layer coated with nickel form top and chromium and gold layers from bottom. We demonstrate the excitation of additive and subtractive type resonance. We show that by properly tuning the frequency and the amplitude of the excitation force, the frequency bandwidth of the resonator is increased. Theoretically, we solved the eigenvalue problem for different axial forces to find the natural frequencies ratio that match the experimental values. Using Galerkin method, a reduced order model is derived to simulate the static and dynamic response of the device where using three symmetric mode shapes provided a good agreement with experimental data. © Copyright 2015 by ASME.
UR - http://hdl.handle.net/10754/621349
UR - https://asmedigitalcollection.asme.org/IDETC-CIE/proceedings/IDETC-CIE2015/57113/Boston,%20Massachusetts,%20USA/254928
UR - http://www.scopus.com/inward/record.url?scp=84979071642&partnerID=8YFLogxK
U2 - 10.1115/DETC2015-47150
DO - 10.1115/DETC2015-47150
M3 - Conference contribution
SN - 9780791857113
BT - Volume 4: 20th Design for Manufacturing and the Life Cycle Conference; 9th International Conference on Micro- and Nanosystems
PB - ASME International
ER -