Abstract
A non-intrusive optical method to measure gas phase temperature in strongly scattering multiphase environments under high-flux, broad-band irradiation, relevant to conditions in high temperature solar reactors was developed and demonstrated. The high-flux irradiation with a peak flux of 450 kW/m2was provided by a 6 kW metal-halide lamp coupled with a reflector and two concentrators. An ethylene/air diffusion flame, which contains fine soot particles, was employed to provide a high temperature reacting flow (approximately 1800 K) with strong optical interference from nano particles having a peak soot volume fractions of ∼16 ppm (with irradiation) under conditions of relevance to solar reactors. Under this environment, the proposed laser-based thermometry technique, line-wise two-line atomic fluorescence (TLAF) has been successfully demonstrated to measure flame temperature with good spatial resolution of ∼1 mm. It was found that the measurement accuracy in the presence of particle and the high-flux external radiation is 65 K at a typical flame temperature of ∼1800 K, while the measurement precision is 38 K. Results reveal that the presence of high-flux irradiation increases the flame temperature by typically 50–100 K. This paper presents a thermometry technique that is suitable for temperature measurement within solar reactors, particularly in hybrid solar-thermal receiver-combustor systems. The experimental setup, measurement methodology and data processing are discussed, followed by the temperature measurements.
Original language | English (US) |
---|---|
Pages (from-to) | 191-198 |
Number of pages | 8 |
Journal | Solar Energy |
Volume | 146 |
DOIs | |
State | Published - Jan 1 2017 |
Externally published | Yes |
ASJC Scopus subject areas
- General Materials Science
- Renewable Energy, Sustainability and the Environment