Oxygen Electrocatalysis on Epitaxial La0.6Sr0.4CoO3-delta Perovskite Thin Films for Solid Oxide Fuel Cells

Ethan J. Crumlin; Sung-Jin Ahn; Dongkyu Lee; Eva Mutoro; Michael D. Biegalski; Hans M. Christen; Yang Shao-Horn

doi:10.1149/2.018207jes

Oxygen Electrocatalysis on Epitaxial La0.6Sr0.4CoO3-delta Perovskite Thin Films for Solid Oxide Fuel Cells

Ethan J. Crumlin, Sung-Jin Ahn, Dongkyu Lee, Eva Mutoro, Michael D. Biegalski, Hans M. Christen, Yang Shao-Horn

Research output: Contribution to journal › Article › peer-review

58 Scopus citations

Abstract

Hetero-structured interfaces of oxides, which can exhibit reactivity characteristics remarkably different from bulk oxides, are interesting systems to explore in search of highly active fuel cell catalysts for oxygen electrocatalysis. (001)-oriented La0.6Sr0.4CoO 3-δ (LSC60-40113) thin films having thicknesses from tens to hundreds of nanometers were grown epitaxially on (001)-oriented yttria-stabilized zirconia (YSZ). Atomic force microscopy showed that all the film surfaces were of high quality with average surface roughness approximately one nanometer. The surface oxygen exchange kinetics of these films were determined by electrochemical impedance spectroscopy. While (001)-oriented LSC60-40113 thin films were found to have similar surface oxygen exchange coefficients to LSC60-40113 bulk, surface coverage of (001)-oriented (La0.5Sr0.5)2CoO4±δ (LSC214) on the LSC60-40113 thin films led to significant enhancement in the surface oxygen kinetics up to ∼3 orders of magnitude. Interestingly, LSC214-decorated LSC60-40113 films have comparable surface exchange kinetics (∼1 · 10 cm·s -1 at 550°C) to similarly prepared LSC214-decorated La0.8Sr0.2CoO3-δ films. Such high surface oxygen kinetics are among the most active SOFC cathode materials reported to date. © 2012 The Electrochemical Society.

Original language	English (US)
Pages (from-to)	F219-F225
Number of pages	1
Journal	JOURNAL OF THE ELECTROCHEMICAL SOCIETY
Volume	159
Issue number	7
DOIs	https://doi.org/10.1149/2.018207jes
State	Published - 2012
Externally published	Yes

Access to Document

10.1149/2.018207jes

Cite this

@article{0837dfcf8e184c9c9c35bbb17c22a246,

title = "Oxygen Electrocatalysis on Epitaxial La0.6Sr0.4CoO3-delta Perovskite Thin Films for Solid Oxide Fuel Cells",

abstract = "Hetero-structured interfaces of oxides, which can exhibit reactivity characteristics remarkably different from bulk oxides, are interesting systems to explore in search of highly active fuel cell catalysts for oxygen electrocatalysis. (001)-oriented La0.6Sr0.4CoO 3-δ (LSC60-40113) thin films having thicknesses from tens to hundreds of nanometers were grown epitaxially on (001)-oriented yttria-stabilized zirconia (YSZ). Atomic force microscopy showed that all the film surfaces were of high quality with average surface roughness approximately one nanometer. The surface oxygen exchange kinetics of these films were determined by electrochemical impedance spectroscopy. While (001)-oriented LSC60-40113 thin films were found to have similar surface oxygen exchange coefficients to LSC60-40113 bulk, surface coverage of (001)-oriented (La0.5Sr0.5)2CoO4±δ (LSC214) on the LSC60-40113 thin films led to significant enhancement in the surface oxygen kinetics up to ∼3 orders of magnitude. Interestingly, LSC214-decorated LSC60-40113 films have comparable surface exchange kinetics (∼1 · 10 cm·s -1 at 550°C) to similarly prepared LSC214-decorated La0.8Sr0.2CoO3-δ films. Such high surface oxygen kinetics are among the most active SOFC cathode materials reported to date. {\textcopyright} 2012 The Electrochemical Society.",

author = "Crumlin, {Ethan J.} and Sung-Jin Ahn and Dongkyu Lee and Eva Mutoro and Biegalski, {Michael D.} and Christen, {Hans M.} and Yang Shao-Horn",

note = "KAUST Repository Item: Exported on 2021-09-16 Acknowledgements: This work was supported in part by DOE (SISGR DE-SC0002633), King Abdullah University of Science and Technology, and King Fahd University of Petroleum and Minerals in Dharam, Saudi Arabia, for funding the research reported in this paper through the Center for Clean Water and Clean Energy at MIT and KFUPM. The PLD preparation performed was conducted at the Center for Nanophase Materials Sciences, which is sponsored at Oak Ridge National Laboratory by the Scientific user Facilities Division, Office of Basic Energy Sciences, U.S. Department of Energy. E. Mutoro is grateful for financial support from the German Research Foundation (DFG research scholarship). The authors thank Prof. Harry Tuller and Dr. Gerardo Jose la O' for their fruitfully discussion. This publication acknowledges KAUST support, but has no KAUST affiliated authors.",

year = "2012",

doi = "10.1149/2.018207jes",

language = "English (US)",

volume = "159",

pages = "F219--F225",

journal = "JOURNAL OF THE ELECTROCHEMICAL SOCIETY",

issn = "1945-7111",

publisher = "Institute of Physics",

number = "7",

}

TY - JOUR

T1 - Oxygen Electrocatalysis on Epitaxial La0.6Sr0.4CoO3-delta Perovskite Thin Films for Solid Oxide Fuel Cells

AU - Crumlin, Ethan J.

AU - Ahn, Sung-Jin

AU - Lee, Dongkyu

AU - Mutoro, Eva

AU - Biegalski, Michael D.

AU - Christen, Hans M.

AU - Shao-Horn, Yang

N1 - KAUST Repository Item: Exported on 2021-09-16 Acknowledgements: This work was supported in part by DOE (SISGR DE-SC0002633), King Abdullah University of Science and Technology, and King Fahd University of Petroleum and Minerals in Dharam, Saudi Arabia, for funding the research reported in this paper through the Center for Clean Water and Clean Energy at MIT and KFUPM. The PLD preparation performed was conducted at the Center for Nanophase Materials Sciences, which is sponsored at Oak Ridge National Laboratory by the Scientific user Facilities Division, Office of Basic Energy Sciences, U.S. Department of Energy. E. Mutoro is grateful for financial support from the German Research Foundation (DFG research scholarship). The authors thank Prof. Harry Tuller and Dr. Gerardo Jose la O' for their fruitfully discussion. This publication acknowledges KAUST support, but has no KAUST affiliated authors.

PY - 2012

Y1 - 2012

N2 - Hetero-structured interfaces of oxides, which can exhibit reactivity characteristics remarkably different from bulk oxides, are interesting systems to explore in search of highly active fuel cell catalysts for oxygen electrocatalysis. (001)-oriented La0.6Sr0.4CoO 3-δ (LSC60-40113) thin films having thicknesses from tens to hundreds of nanometers were grown epitaxially on (001)-oriented yttria-stabilized zirconia (YSZ). Atomic force microscopy showed that all the film surfaces were of high quality with average surface roughness approximately one nanometer. The surface oxygen exchange kinetics of these films were determined by electrochemical impedance spectroscopy. While (001)-oriented LSC60-40113 thin films were found to have similar surface oxygen exchange coefficients to LSC60-40113 bulk, surface coverage of (001)-oriented (La0.5Sr0.5)2CoO4±δ (LSC214) on the LSC60-40113 thin films led to significant enhancement in the surface oxygen kinetics up to ∼3 orders of magnitude. Interestingly, LSC214-decorated LSC60-40113 films have comparable surface exchange kinetics (∼1 · 10 cm·s -1 at 550°C) to similarly prepared LSC214-decorated La0.8Sr0.2CoO3-δ films. Such high surface oxygen kinetics are among the most active SOFC cathode materials reported to date. © 2012 The Electrochemical Society.

AB - Hetero-structured interfaces of oxides, which can exhibit reactivity characteristics remarkably different from bulk oxides, are interesting systems to explore in search of highly active fuel cell catalysts for oxygen electrocatalysis. (001)-oriented La0.6Sr0.4CoO 3-δ (LSC60-40113) thin films having thicknesses from tens to hundreds of nanometers were grown epitaxially on (001)-oriented yttria-stabilized zirconia (YSZ). Atomic force microscopy showed that all the film surfaces were of high quality with average surface roughness approximately one nanometer. The surface oxygen exchange kinetics of these films were determined by electrochemical impedance spectroscopy. While (001)-oriented LSC60-40113 thin films were found to have similar surface oxygen exchange coefficients to LSC60-40113 bulk, surface coverage of (001)-oriented (La0.5Sr0.5)2CoO4±δ (LSC214) on the LSC60-40113 thin films led to significant enhancement in the surface oxygen kinetics up to ∼3 orders of magnitude. Interestingly, LSC214-decorated LSC60-40113 films have comparable surface exchange kinetics (∼1 · 10 cm·s -1 at 550°C) to similarly prepared LSC214-decorated La0.8Sr0.2CoO3-δ films. Such high surface oxygen kinetics are among the most active SOFC cathode materials reported to date. © 2012 The Electrochemical Society.

UR - http://hdl.handle.net/10754/671255

UR - https://iopscience.iop.org/article/10.1149/2.018207jes

UR - http://www.scopus.com/inward/record.url?scp=84872945153&partnerID=8YFLogxK

U2 - 10.1149/2.018207jes

DO - 10.1149/2.018207jes

M3 - Article

SN - 1945-7111

VL - 159

SP - F219-F225

JO - JOURNAL OF THE ELECTROCHEMICAL SOCIETY

JF - JOURNAL OF THE ELECTROCHEMICAL SOCIETY

IS - 7

ER -

Oxygen Electrocatalysis on Epitaxial La0.6Sr0.4CoO3-delta Perovskite Thin Films for Solid Oxide Fuel Cells

Abstract

Access to Document

Other files and links

Fingerprint

Cite this