pH Sensing of Printed Flexible Sensors

Anindya Nag; Omer Faruk Dorsum; Subhas Mukhopadhyay; Jürgen Kosel

doi:10.1109/ICSensT.2018.8603624

pH Sensing of Printed Flexible Sensors

Anindya Nag, Omer Faruk Dorsum, Subhas Mukhopadhyay, Jürgen Kosel

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Scopus citations

Abstract

This paper presents the fabrication and implementation of some of the printed flexible sensors develop with laser cutting technique. Different types of elastomeric and conductive materials were used to fabricate the electrodes and substrates of the sensor prototypes. The developed prototypes were then used as pH sensors to determine their behavior over a range of pH values at the acidic and basic spectrum. The behavior of these prototypes proved their potential to be used for electrochemical sensing in different health and environmental applications.

Original language	English (US)
Title of host publication	2018 12th International Conference on Sensing Technology (ICST)
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
Pages	341-346
Number of pages	6
ISBN (Print)	9781538651476
DOIs	https://doi.org/10.1109/ICSensT.2018.8603624
State	Published - Jan 24 2019

Access to Document

10.1109/ICSensT.2018.8603624

https://repository.kaust.edu.sa/bitstream/10754/631759/1/08603624.pdf

Cite this

@inproceedings{be5603da4a744f2abe5199f9347beba8,

title = "pH Sensing of Printed Flexible Sensors",

abstract = "This paper presents the fabrication and implementation of some of the printed flexible sensors develop with laser cutting technique. Different types of elastomeric and conductive materials were used to fabricate the electrodes and substrates of the sensor prototypes. The developed prototypes were then used as pH sensors to determine their behavior over a range of pH values at the acidic and basic spectrum. The behavior of these prototypes proved their potential to be used for electrochemical sensing in different health and environmental applications.",

author = "Anindya Nag and Dorsum, {Omer Faruk} and Subhas Mukhopadhyay and J{\"u}rgen Kosel",

note = "KAUST Repository Item: Exported on 2020-10-01 Acknowledgements: The authors are thankful to King Abdullah University of Science and Technology (KAUST), Saudi Arabia, to provide the research facilities to fabricate the sensor patches. They would also thank the Macquarie University, Australia for providing the research conditions to perform experiments with the developed sensor patches.",

year = "2019",

month = jan,

day = "24",

doi = "10.1109/ICSensT.2018.8603624",

language = "English (US)",

isbn = "9781538651476",

pages = "341--346",

booktitle = "2018 12th International Conference on Sensing Technology (ICST)",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

}

TY - GEN

T1 - pH Sensing of Printed Flexible Sensors

AU - Nag, Anindya

AU - Dorsum, Omer Faruk

AU - Mukhopadhyay, Subhas

AU - Kosel, Jürgen

N1 - KAUST Repository Item: Exported on 2020-10-01 Acknowledgements: The authors are thankful to King Abdullah University of Science and Technology (KAUST), Saudi Arabia, to provide the research facilities to fabricate the sensor patches. They would also thank the Macquarie University, Australia for providing the research conditions to perform experiments with the developed sensor patches.

PY - 2019/1/24

Y1 - 2019/1/24

N2 - This paper presents the fabrication and implementation of some of the printed flexible sensors develop with laser cutting technique. Different types of elastomeric and conductive materials were used to fabricate the electrodes and substrates of the sensor prototypes. The developed prototypes were then used as pH sensors to determine their behavior over a range of pH values at the acidic and basic spectrum. The behavior of these prototypes proved their potential to be used for electrochemical sensing in different health and environmental applications.

AB - This paper presents the fabrication and implementation of some of the printed flexible sensors develop with laser cutting technique. Different types of elastomeric and conductive materials were used to fabricate the electrodes and substrates of the sensor prototypes. The developed prototypes were then used as pH sensors to determine their behavior over a range of pH values at the acidic and basic spectrum. The behavior of these prototypes proved their potential to be used for electrochemical sensing in different health and environmental applications.

UR - http://hdl.handle.net/10754/631759

UR - https://ieeexplore.ieee.org/document/8603624

UR - http://www.scopus.com/inward/record.url?scp=85061480610&partnerID=8YFLogxK

U2 - 10.1109/ICSensT.2018.8603624

DO - 10.1109/ICSensT.2018.8603624

M3 - Conference contribution

SN - 9781538651476

SP - 341

EP - 346

BT - 2018 12th International Conference on Sensing Technology (ICST)

PB - Institute of Electrical and Electronics Engineers (IEEE)

ER -

pH Sensing of Printed Flexible Sensors

Abstract

Access to Document

Other files and links

Fingerprint

Cite this