Preparation, characterization and performance of conducting polypyrrole composites based on polysulfone

A. Bhattacharya; D. C. Mukherjee; J. M. Gohil; Y. Kumar; S. Kundu

doi:10.1016/j.desal.2006.07.018

Preparation, characterization and performance of conducting polypyrrole composites based on polysulfone

A. Bhattacharya^*, D. C. Mukherjee, J. M. Gohil, Y. Kumar, S. Kundu

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

30 Scopus citations

Abstract

The poor applicability of conducting polymers due to the limitations of processibility has motivated researchersto prepare their composites. Diffusive chemical oxidative polymerization technique of pyrrole is employed toprepare polypyrrole-polysulfone (PPy-Psf) composite membranes. FTIR, TGA and AFM studies have been carriedout to provide evidence for incorporation of pyrrole moiety as well as to characterize the composites. The polysulfone-polypyrrole composite membranes show the potential of removing sodium chloride and magnesium sulfate fromthe solution to a certain extent. The study reveals that salt rejection performance of the composite membranesdepends on the FeCl₃ dopant concentration, and it follows the order R_MgSO4 > R_NaCl.

Original language	English (US)
Pages (from-to)	366-372
Number of pages	7
Journal	Desalination
Volume	225
Issue number	1-3
DOIs	https://doi.org/10.1016/j.desal.2006.07.018
State	Published - May 1 2008
Externally published	Yes

Keywords

Composite
Membrane
Polypyrrole
Polysulfone
Rejection

ASJC Scopus subject areas

General Chemistry
General Chemical Engineering
General Materials Science
Water Science and Technology
Mechanical Engineering

Access to Document

10.1016/j.desal.2006.07.018

Cite this

@article{406a8f0d2591478dbfd238ed42da5445,

title = "Preparation, characterization and performance of conducting polypyrrole composites based on polysulfone",

abstract = "The poor applicability of conducting polymers due to the limitations of processibility has motivated researchersto prepare their composites. Diffusive chemical oxidative polymerization technique of pyrrole is employed toprepare polypyrrole-polysulfone (PPy-Psf) composite membranes. FTIR, TGA and AFM studies have been carriedout to provide evidence for incorporation of pyrrole moiety as well as to characterize the composites. The polysulfone-polypyrrole composite membranes show the potential of removing sodium chloride and magnesium sulfate fromthe solution to a certain extent. The study reveals that salt rejection performance of the composite membranesdepends on the FeCl3 dopant concentration, and it follows the order RMgSO4 > RNaCl.",

keywords = "Composite, Membrane, Polypyrrole, Polysulfone, Rejection",

author = "A. Bhattacharya and Mukherjee, {D. C.} and Gohil, {J. M.} and Y. Kumar and S. Kundu",

note = "Funding Information: The financial support of the All India Council for Technical Education in the form of an award of Emeritus Fellowship to DCM is gratefully acknowledged.",

year = "2008",

month = may,

day = "1",

doi = "10.1016/j.desal.2006.07.018",

language = "English (US)",

volume = "225",

pages = "366--372",

journal = "Desalination",

issn = "0011-9164",

publisher = "Elsevier B.V.",

number = "1-3",

}

TY - JOUR

T1 - Preparation, characterization and performance of conducting polypyrrole composites based on polysulfone

AU - Bhattacharya, A.

AU - Mukherjee, D. C.

AU - Gohil, J. M.

AU - Kumar, Y.

AU - Kundu, S.

N1 - Funding Information: The financial support of the All India Council for Technical Education in the form of an award of Emeritus Fellowship to DCM is gratefully acknowledged.

PY - 2008/5/1

Y1 - 2008/5/1

N2 - The poor applicability of conducting polymers due to the limitations of processibility has motivated researchersto prepare their composites. Diffusive chemical oxidative polymerization technique of pyrrole is employed toprepare polypyrrole-polysulfone (PPy-Psf) composite membranes. FTIR, TGA and AFM studies have been carriedout to provide evidence for incorporation of pyrrole moiety as well as to characterize the composites. The polysulfone-polypyrrole composite membranes show the potential of removing sodium chloride and magnesium sulfate fromthe solution to a certain extent. The study reveals that salt rejection performance of the composite membranesdepends on the FeCl3 dopant concentration, and it follows the order RMgSO4 > RNaCl.

AB - The poor applicability of conducting polymers due to the limitations of processibility has motivated researchersto prepare their composites. Diffusive chemical oxidative polymerization technique of pyrrole is employed toprepare polypyrrole-polysulfone (PPy-Psf) composite membranes. FTIR, TGA and AFM studies have been carriedout to provide evidence for incorporation of pyrrole moiety as well as to characterize the composites. The polysulfone-polypyrrole composite membranes show the potential of removing sodium chloride and magnesium sulfate fromthe solution to a certain extent. The study reveals that salt rejection performance of the composite membranesdepends on the FeCl3 dopant concentration, and it follows the order RMgSO4 > RNaCl.

KW - Composite

KW - Membrane

KW - Polypyrrole

KW - Polysulfone

KW - Rejection

UR - http://www.scopus.com/inward/record.url?scp=40049105607&partnerID=8YFLogxK

U2 - 10.1016/j.desal.2006.07.018

DO - 10.1016/j.desal.2006.07.018

M3 - Article

AN - SCOPUS:40049105607

SN - 0011-9164

VL - 225

SP - 366

EP - 372

JO - Desalination

JF - Desalination

IS - 1-3

ER -

Preparation, characterization and performance of conducting polypyrrole composites based on polysulfone

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this