Simulation of HCCI-addressing compression ratio and turbo charging

Olof Erlandsson*, Patrik Einewall, Bengt Johansson, Per Amneus, Fabian Mauss

*Corresponding author for this work

Research output: Contribution to conferencePaperpeer-review

5 Scopus citations


This paper focuses on the performance and efficiency of an HCCI (Homogenous Charge Compression Ignition) engine system running on natural gas or landfill gas for stationary applications. Zero dimensional modeling and simulation of the engine, turbo, inlet and exhaust manifolds and inlet air conditioner (intercooler/heater) are used to study the effect of compression ratio and exhaust turbine size on maximum mean effective pressure and efficiency. The extended Zeldovich mechanism is used to estimate NO-formation in order to determine operation limits. Detailed chemical kinetics is used to predict ignition timing. Simulation of the in-cylinder process gives a minimum λ-value of 2.4 for natural gas, regardless of compression ratio. This is restricted by the NO formation for richer mixtures. Lower compression ratios allow higher inlet pressure and hence higher load, but it also reduces indicated efficiency. Given indicated mean effective pressure, IMEP and a fixed friction, FMEP the best brake efficiency was attained at compression ratios of 15:1 to 17:1, according to the simulations. Full system simulation using three different turbines, showed that the required inlet pressure could not be reached. At these low loads a high compression ratio enables lower inlet temperature. This provides higher mass flow and hence power output. The higher compression ratio also increases the indicated- and brake efficiency. Very small turbines or advanced turbo charging technologies seems necessary in order to give acceptable specific power and brake efficiency.

Original languageEnglish (US)
StatePublished - Dec 1 2002
EventPowertrain and Fluid Systems Conference and Exhibition - San Diego, CA, United States
Duration: Oct 21 2002Oct 24 2002


OtherPowertrain and Fluid Systems Conference and Exhibition
Country/TerritoryUnited States
CitySan Diego, CA

ASJC Scopus subject areas

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering


Dive into the research topics of 'Simulation of HCCI-addressing compression ratio and turbo charging'. Together they form a unique fingerprint.

Cite this