TY - JOUR
T1 - Solar light assisted photocatalytic degradation of 1,4-dioxane using high temperature stable anatase W-TiO2 nanocomposites
AU - Byrne, Ciara
AU - Dervin, Saoirse
AU - Hermosilla, Daphne
AU - Merayo, Noemí
AU - Blanco, Ángeles
AU - Hinder, Steven
AU - Harb, Moussab
AU - Dionysiou, Dionysios D.
AU - Pillai, Suresh C.
N1 - KAUST Repository Item: Exported on 2021-03-25
Acknowledgements: Ciara Byrne and Saoirse Dervin would like to thank the Institute of Technology Sligofor financial support. The research has received funding from the Ministerio de Economía y Competitividad of Spain (research grant number: CTM2016-77948-R). The authors would like to acknowledge access to Raman Spectroscopy at Centre for Research in Engineering Surface Technology (CREST), FOCAS Institute, Dublin Institute of Technology, Kevin Street, Dublin 8, Ireland. Moussab Harb acknowledges the Supercomputing Laboratory at the King Abdullah University of Science and Technology (KAUST) for providing CPU resources. D. D. Dionysiou also acknowledges support from the University of Cincinnati through the Herman Schneider Professorship in the College of Engineering and Applied Sciences.
PY - 2021/2
Y1 - 2021/2
N2 - This work outlines a systematic and detailed study of the modification of anatase TiO2 with tungsten (W). The impact this coupling has on the temperature of the anatase to rutile phase transition and the photocatalytic degradation of 1,4-dioxane, a highly toxic compound that is increasingly present in water bodies is also studied. TiO2 composite photocatalysts with 2, 4, 8 and 16 mol. % W, respectively, were produced using a sol-gel process and then calcined between 500−1000 °C. The crystallinity and phase composition of pure and W-TiO2 photocatalysts were examined using X-ray Diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All W-TiO2 composite photocatalysts demonstrated 100 % anatase crystalline phase at calcination temperatures as high as 800 °C. Due to the retention of 26 % anatase after calcination at 950 °C, 8 mol. % W was established as the optimum W loading for the development of high temperature stable anatase W-TiO2 composite photocatalysts. The % anatase content also significantly impacts the photocatalytic activity of the W-TiO2 composite photocatalysts. In the presence of solar light, 100 % of 1,4-dioxane was successfully degraded by 2-W-TiO2, 4-W-TiO2 and 8-W-TiO2 composite photocatalysts, respectively, calcined at 800 °C. However, as the calcination temperature increases and the % anatase content decreases, only 70 % of 1,4-dioxane was degraded when using 4-W-TiO2 and 8-W-TiO2 calcined at 900 °C. The highest % removal of 1,4-dioxane was also achieved using 8-W-TiO2 calcined at both 800 and 900 °C. 8-W-TiO2 is therefore considered the optimum sample for both photocatalysis and phase transition temperature.
AB - This work outlines a systematic and detailed study of the modification of anatase TiO2 with tungsten (W). The impact this coupling has on the temperature of the anatase to rutile phase transition and the photocatalytic degradation of 1,4-dioxane, a highly toxic compound that is increasingly present in water bodies is also studied. TiO2 composite photocatalysts with 2, 4, 8 and 16 mol. % W, respectively, were produced using a sol-gel process and then calcined between 500−1000 °C. The crystallinity and phase composition of pure and W-TiO2 photocatalysts were examined using X-ray Diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All W-TiO2 composite photocatalysts demonstrated 100 % anatase crystalline phase at calcination temperatures as high as 800 °C. Due to the retention of 26 % anatase after calcination at 950 °C, 8 mol. % W was established as the optimum W loading for the development of high temperature stable anatase W-TiO2 composite photocatalysts. The % anatase content also significantly impacts the photocatalytic activity of the W-TiO2 composite photocatalysts. In the presence of solar light, 100 % of 1,4-dioxane was successfully degraded by 2-W-TiO2, 4-W-TiO2 and 8-W-TiO2 composite photocatalysts, respectively, calcined at 800 °C. However, as the calcination temperature increases and the % anatase content decreases, only 70 % of 1,4-dioxane was degraded when using 4-W-TiO2 and 8-W-TiO2 calcined at 900 °C. The highest % removal of 1,4-dioxane was also achieved using 8-W-TiO2 calcined at both 800 and 900 °C. 8-W-TiO2 is therefore considered the optimum sample for both photocatalysis and phase transition temperature.
UR - http://hdl.handle.net/10754/668246
UR - https://linkinghub.elsevier.com/retrieve/pii/S092058612100064X
UR - http://www.scopus.com/inward/record.url?scp=85101982437&partnerID=8YFLogxK
U2 - 10.1016/j.cattod.2021.02.001
DO - 10.1016/j.cattod.2021.02.001
M3 - Article
SN - 0920-5861
JO - Catalysis Today
JF - Catalysis Today
ER -