Solid state solar cell made from nanocrystalline TiO2 with a fluorene-thiophene copolymer as a hole-conductor

P. Ravirajan; S. A. Haque; D. Poplavskyy; J. R. Durrant; D. D.C. Bradley; J. Nelson

doi:10.1117/12.506017

Solid state solar cell made from nanocrystalline TiO2 with a fluorene-thiophene copolymer as a hole-conductor

P. Ravirajan, S. A. Haque, D. Poplavskyy, J. R. Durrant, D. D.C. Bradley, J. Nelson

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Scopus citations

Abstract

We study the charge recombination kinetics and photovoltaic performance of composites of poly (9,9-dioctylfluorene-co-bithiophene) polymer with nanocrystalline TiO2. Transient optical spectroscopy confirms that photoexciation of the polymer leads to electron transfer to the TiO2 and indicates that charge recombination is slow with a half-life of 100μs to 10ms. Polymer penetration into thick porous TiO2 layers is improved by melt-processing and treatment of the TiO2 surface. We study the photovoltaic characteristics of devices with different layer thickness and interface morphology. Quantum efficiency (QE) of all devices is increased by reducing the TiO2 and polymer layer thickness. Inserting a thin porous TiO2 layer in to a thin bi-layer device increases the QE by a factor of five. The improved device shows peak QE and monochromatic power conversion efficiencies of over 11% and 1% at 440nm respectively. The device produced a short-circuit current density of 300μAcm-2, a fill factor of 0.24 and an open-circuit voltage of 0.8V under AM1.5 illumination. The fill factor is increased from 0.24 to 0.40 by introducing an additional dip-coating layer and overall power conversion efficiency is increased by 50%. However, the device produced degraded current-voltage characteristics. We investigate this using an alternative polymers and different top contact metals.

Original language	English (US)
Title of host publication	Proceedings of SPIE - The International Society for Optical Engineering
DOIs	https://doi.org/10.1117/12.506017
State	Published - May 3 2004
Externally published	Yes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1117/12.506017

Cite this

@inproceedings{9d79ca4b2e35400b89554213b3486483,

title = "Solid state solar cell made from nanocrystalline TiO2 with a fluorene-thiophene copolymer as a hole-conductor",

abstract = "We study the charge recombination kinetics and photovoltaic performance of composites of poly (9,9-dioctylfluorene-co-bithiophene) polymer with nanocrystalline TiO2. Transient optical spectroscopy confirms that photoexciation of the polymer leads to electron transfer to the TiO2 and indicates that charge recombination is slow with a half-life of 100μs to 10ms. Polymer penetration into thick porous TiO2 layers is improved by melt-processing and treatment of the TiO2 surface. We study the photovoltaic characteristics of devices with different layer thickness and interface morphology. Quantum efficiency (QE) of all devices is increased by reducing the TiO2 and polymer layer thickness. Inserting a thin porous TiO2 layer in to a thin bi-layer device increases the QE by a factor of five. The improved device shows peak QE and monochromatic power conversion efficiencies of over 11% and 1% at 440nm respectively. The device produced a short-circuit current density of 300μAcm-2, a fill factor of 0.24 and an open-circuit voltage of 0.8V under AM1.5 illumination. The fill factor is increased from 0.24 to 0.40 by introducing an additional dip-coating layer and overall power conversion efficiency is increased by 50%. However, the device produced degraded current-voltage characteristics. We investigate this using an alternative polymers and different top contact metals.",

author = "P. Ravirajan and Haque, {S. A.} and D. Poplavskyy and Durrant, {J. R.} and Bradley, {D. D.C.} and J. Nelson",

note = "Generated from Scopus record by KAUST IRTS on 2019-11-27",

year = "2004",

month = may,

day = "3",

doi = "10.1117/12.506017",

language = "English (US)",

booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

}

TY - GEN

T1 - Solid state solar cell made from nanocrystalline TiO2 with a fluorene-thiophene copolymer as a hole-conductor

AU - Ravirajan, P.

AU - Haque, S. A.

AU - Poplavskyy, D.

AU - Durrant, J. R.

AU - Bradley, D. D.C.

AU - Nelson, J.

N1 - Generated from Scopus record by KAUST IRTS on 2019-11-27

PY - 2004/5/3

Y1 - 2004/5/3

N2 - We study the charge recombination kinetics and photovoltaic performance of composites of poly (9,9-dioctylfluorene-co-bithiophene) polymer with nanocrystalline TiO2. Transient optical spectroscopy confirms that photoexciation of the polymer leads to electron transfer to the TiO2 and indicates that charge recombination is slow with a half-life of 100μs to 10ms. Polymer penetration into thick porous TiO2 layers is improved by melt-processing and treatment of the TiO2 surface. We study the photovoltaic characteristics of devices with different layer thickness and interface morphology. Quantum efficiency (QE) of all devices is increased by reducing the TiO2 and polymer layer thickness. Inserting a thin porous TiO2 layer in to a thin bi-layer device increases the QE by a factor of five. The improved device shows peak QE and monochromatic power conversion efficiencies of over 11% and 1% at 440nm respectively. The device produced a short-circuit current density of 300μAcm-2, a fill factor of 0.24 and an open-circuit voltage of 0.8V under AM1.5 illumination. The fill factor is increased from 0.24 to 0.40 by introducing an additional dip-coating layer and overall power conversion efficiency is increased by 50%. However, the device produced degraded current-voltage characteristics. We investigate this using an alternative polymers and different top contact metals.

AB - We study the charge recombination kinetics and photovoltaic performance of composites of poly (9,9-dioctylfluorene-co-bithiophene) polymer with nanocrystalline TiO2. Transient optical spectroscopy confirms that photoexciation of the polymer leads to electron transfer to the TiO2 and indicates that charge recombination is slow with a half-life of 100μs to 10ms. Polymer penetration into thick porous TiO2 layers is improved by melt-processing and treatment of the TiO2 surface. We study the photovoltaic characteristics of devices with different layer thickness and interface morphology. Quantum efficiency (QE) of all devices is increased by reducing the TiO2 and polymer layer thickness. Inserting a thin porous TiO2 layer in to a thin bi-layer device increases the QE by a factor of five. The improved device shows peak QE and monochromatic power conversion efficiencies of over 11% and 1% at 440nm respectively. The device produced a short-circuit current density of 300μAcm-2, a fill factor of 0.24 and an open-circuit voltage of 0.8V under AM1.5 illumination. The fill factor is increased from 0.24 to 0.40 by introducing an additional dip-coating layer and overall power conversion efficiency is increased by 50%. However, the device produced degraded current-voltage characteristics. We investigate this using an alternative polymers and different top contact metals.

UR - http://proceedings.spiedigitallibrary.org/proceeding.aspx?doi=10.1117/12.506017

UR - http://www.scopus.com/inward/record.url?scp=1942517814&partnerID=8YFLogxK

U2 - 10.1117/12.506017

DO - 10.1117/12.506017

M3 - Conference contribution

BT - Proceedings of SPIE - The International Society for Optical Engineering

ER -

Solid state solar cell made from nanocrystalline TiO2 with a fluorene-thiophene copolymer as a hole-conductor

Abstract

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this