Study on the role of laser surface irradiation on damage and decohesion of Al/epoxy joints

Marco Alfano, Gilles Lubineau, Franco M. Furgiuele, Gláucio Hermogenes Paulino

Research output: Contribution to journalArticlepeer-review

54 Scopus citations

Abstract

In this work we investigate the effect of laser irradiation on the bond toughness of aluminum/epoxy bonded joints. The evolution of substrate surface morphology and wettability, for various sets of laser process parameters (i.e. laser power, line spacing, scan speed), was investigated by means of Scanning Electron Microscopy (SEM) and contact angle measurements. A proper combination of power, line spacing and scan speed was then selected and adhesive bonded Al/epoxy T-peel joints were prepared and tested. For comparison, similar samples were produced using substrates with classical grit blasting surface treatment. Finally, post-failure SEM analyses of fracture surfaces were performed, and in order to typify the increase in bond toughness of the joints, finite element simulations were carried out using a potential based cohesive zone model of fracture. © 2012 Elsevier Ltd.
Original languageEnglish (US)
Pages (from-to)33-41
Number of pages9
JournalInternational Journal of Adhesion and Adhesives
Volume39
DOIs
StatePublished - Dec 2012

ASJC Scopus subject areas

  • Biomaterials
  • Polymers and Plastics
  • General Chemical Engineering

Fingerprint

Dive into the research topics of 'Study on the role of laser surface irradiation on damage and decohesion of Al/epoxy joints'. Together they form a unique fingerprint.

Cite this