Fully-integrated systems and self-powered gas sensors for sustainable environment monitoring

  • Mani Teja Vijjapu

Student thesis: Doctoral Thesis


Mobile devices for the personalized detection of health and environmental hazards are becoming the basis for futuristic sensing technologies. In recent decades, air and environmental pollution levels have risen globally. Therefore, environmental protection must be strengthened by developing sensors that detect pollutants. The monitoring of these pollutants with high spatial coverage requires inexpensive electronic gas sensors and self sustainable sensing systems that can be deployed everywhere. This dissertation reports on technological developments to provide solutions for inexpensive, compact, power efficient, and easily deployable toxic gas sensors and integrated systems using semiconducting metal-oxide thin-film transistors (TFTs). The first part of the dissertation introduces the fabrication and characterization of an amorphous indium gallium zinc oxide (IGZO) TFT as a toxic gas sensor. In contrast to existing metal-oxide gas sensors, which are active either with light activation or at high temperature, the developed IGZO TFT sensors are operable at room temperature and require only visible light activation to revive them after exposure to NO2. IGZO TFT sensors exhibited remarkable selectivity and sensitivity to low concentrations of nitrogen dioxide (NO2). The second part of the dissertation introduces the design and realization of the IGZO-based fully integrated gas detectors. Unlike existing gas-sensing systems, which have discrete hardware for signal conditioning, read-out, and data acquisition, the developed integrated detectors constitute thesemodules integrated using IGZO TFT technology. The integrated detectors detect ambient NO2 gas and generate a digital output that is proportional to the ambient gas concentrations. Two types of integrated gas detectors were developed that differ in their mode of operation and circuitry design. These detectors are scalable and pave the way for portable systems to realize various gas-sensing applications, including smart cities and sustainable ecosystems. The success of personalized monitoring devices relies on the following factors: minimum power consumption, selectivity, and stability under extreme conditions that determine overall performance. One of the best solutions to minimize power consumption in these devices is to have a complementary energy-harvesting feature. Hence, the dissertation concludes with the design of self-powered sensors, which are IGZO sensors with self-powering capabilities. Self-powered sensors are p-n heterojunction sensors, developed using IGZO and hybrid-perovskites.
Date of AwardFeb 2022
Original languageEnglish (US)
Awarding Institution
  • Computer, Electrical and Mathematical Sciences and Engineering
SupervisorKhaled Salama (Supervisor)


  • Gas sensor
  • Metal oxides
  • self-powered
  • integrated system
  • NO2 Sensors

Cite this